Male type inflator nozzle with 3/16″ inner flexible hose barb

Trolley for stretching the patch, with a high-quality wooden handle quality. Its molded handle makes it a portable and easy to use tool.

Brush used exclusively to remove particles rubber in the repair area, after texturing the area where the patch will be applied.
NOTE: Do not use solvents or liquid rubber cleaners on the already scratched area.

Air storage tank for eyebrow seating, with a capacity of 27 liters (120lb.)

GRAIN 60
Vented for chamber scraping, 2″ diameter.
GRAIN 36
With vent to give texture to the innerliner, 2″ in diameter.
GRAIN 16
With vent for removal of installed patches, 2″ diameter.
GRAIN 36
With ventilation to give texture to the innerliner of the tire and the cameras, 3″x 2″ in diameter.
HOOD TYPE WITH VENTILATION
36 grit, to texture tread ends, 4″ diameter.
BELL TYPE
Grit 36, to give texture to the innerliner, 3″ in diameter.
WITH HOOD TYPE VENTILATION
Grit 16, for the removal of already installed patches and surface gouging, 3″ in diameter.
WITH HOOD TYPE VENTILATION
36 grit, for textured tread ends, 3″ diameter.

To remove already installed patches and rubber on the outside of the tire.

Industrial crayon for patch identification and marking and tires, widely used in retreading systems, tire control and repairmen.

Heavy-duty gaskets for mandrels and collets.

Double angle foot chuck, 1/4″ (6.35mm) female thread
Inflator chuck with male spigot for 3/16″ internal hose.

MASTER-type gauges/inflators, with analog dial on colors for easy reading, offering great resistance beaten for its «ABS» material, its double graduation in (bar/psi), in addition to its great ergonomic design and a sensitive needle for excellent readings.

Specially designed to resist impacts, due to its «ABS» material. has a design ergonomic and with an «LCD» reading screen. Pressure range of 5-150psi.

Heavy-duty, featuring a metal indicator bar. These meters represent the simplest and cheapest maintenance for your tires, which implies significant fuel savings and money on tires.

Tool to easily install and remove valves.
NOTE: Before installing, lubricate the valve.

Tool used to scrape, cut rubber and ropes, leaving a good texture when making any repair.

Sets of TNT levers, for the removal and mounting of truck tires.

Iron specially manufactured for the vulcanization of car tire patches, generating heat by means of a thermostat regulated at a temperature ranging from 110°C to 135°C to carry out a vulcanization.

Iron specially made for the vulcanization of patches and chamber valves, carrying a temperature from 90°C to 110°C, generating heat by means of an electric thermostat.

Made exclusively for marking patches when installing; since they have centering and aligned lines; plus one center slot with approximate damage limit dimensions in each one, which allows us to focus the damage on the patch.

Ideal mushroom-type silicon carbide mounted tips to remove damaged and loose steel cables; as well as those of tapered and pencil type, excellent for blunting wires loose and damaged steel studs in radial tires.

Tungsten carbide tips, for the cleaning of the drilling channel in diagonal tires.

Cap specially designed for any type of valve.

Multipurpose tools for valves.
This 4-in-1 standard tool repairs top rope, pivot rope, also has an end to easily remove damaged pivots, and a standard flow pivot puller.